| General Requirements |
| 1 |
Charger Capacity |
120kW |
| |
|
|
| Input Requirements |
| 2 |
AC Supply System |
Three-Phase, 5 Wire AC system |
| 3 |
Nominal Input voltage |
380V±15% |
| 4 |
Input frequency |
45-65Hz |
| Environmental Requirements |
| 5 |
Ambient Temperature Range |
-25 to 55°C |
| 6 |
Ambient Humidity |
5 to 95% |
| 7 |
Storage temperature |
-40 to 70°C |
| 8 |
Environmental Condition |
Outdoor use |
| Mechanical Requirements |
| 9 |
Mechanical Stability |
As per IEC 61851-1 Section 11.11.2 |
| 10 |
IP Ratings |
IP 55 |
| 11 |
Cooling |
Forced air cooled |
| Output Requirements |
| 12 |
Number of outputs |
2 |
| 13 |
Type of each output |
DC200-1000V |
| 14 |
Output Current |
Max. 300 Amp |
| 15 |
Output Connector Compatibility |
IEC 62196, IEC 61851 |
| 16 |
Converter Efficiency |
≥95% at nominal output power |
| 17 |
Power Factor |
≥0.99 (Full load) |
| User Interface & Display Requirements |
| 18 |
Emergency stop switch |
Support |
| 19 |
Display |
12.1 inch color touch screen |
| 20 |
User Authentication |
QR Code/RFID Card /Password Login |
| 21 |
Metering Information |
Consumption Units |
| Communication Requirements |
| 22 |
Communication between EVSE and Central Server |
Open Charge Point Protocol (OCPP) 1.6 protocol |
| 23 |
Metering |
Grid responsive metering as per units' consumption of each vehicle |
| 24 |
Interface between charger and CMS |
Ethernet/3G/4G/WIFI |
| Protection & Safety Requirements |
| 25 |
Safety Parameters |
Over current, under voltage, residual current, surge protection, leakage protection, short circuit, over temperature, etc. |